PCPartPicker

  • Log In
  • Register

Build Guide

Modest AMD Gaming Build

by manirelli

Description

CPU

Our Modest AMD Gaming Build is built around the Ryzen 5 2600. Using the stock cooler you should be able to achieve moderate overclocks on this unlocked processor.

Motherboard

We've paired the R5 2600 with a parametric list of mATX B450 motherboards that supports up to 64GB of DDR4 memory, multiple SATA6 devices, and front panel USB3.0.

Memory

For this build we opted to go with 16GB of DDR4 memory. The parametric filter finds the best price on 16GB kits of memory that are within AMD’s recommended specifications. We've limited it to a range from DDR4-3000 to DDR4-3400 as Ryzen CPUs scale well with higher frequency memory. At the current time, using memory rated over 3400mhz is not advised without doing extra research as DIMM support can be hit or miss. AMD is working on releasing additional BIOS updates to add better compatibility for higher frequency memory.

Storage

We're also using a parametric filter that will actively select the best-priced SSD of at least 500GB capacity. Additionally, we're including a 2TB mechanical hard drive in a parametric filter for things like storing media and extra games. Everyone's storage needs differ, so feel free to change the capacity to your usage.

GPU

At this price point we suggest using the AMD RX 580 8GB edition. We specifically filter for the 8GB model as the 4GB may run into issues in more VRAM-heavy games. The performance across most games will be similar to the Nvidia GTX 1060. We've created a parametric filter to show you the lowest priced, full sized AMD RX 580 8GB which will be powerful enough for most AAA games at 1080p.

Case

All of the components are housed in the Thermaltake Versa H18 Tempered Glass MicroATX mini tower. This case is an affordable option that has a large side panel window, front panel USB3.0, room for full size graphics cards, and cutouts in the motherboard tray for easy cable routing.

PSU

For our power supply, we're using a parametric selection of well-reviewed fully and semi-modular units, all of which will provide more than enough power for this system.

Part List Customize This Part List

Compatibility Check: No issues/incompatibilities found.

Estimated Wattage: 294W
Component Selection Base Promo Shipping Tax Price Where
CPU €160.54 €160.54 Amazon Espana Buy
Motherboard
From parametric filter
  • Socket / CPU: AM4
  • Form Factor: Micro ATX
  • Chipset: AMD B450
  • RAM Slots: 4 - 16
€65.99 Free two-day shipping with Amazon Prime €65.99 Amazon Espana Buy
Memory
From parametric filter
  • Speed: DDR4-3000, DDR4-3200, DDR4-3300, DDR4-3400
  • Type: 288-pin DIMM
  • Size: 16GB (2x8GB)
€86.90 €8.92 €95.82 Alternate Buy
Storage
From parametric filter
  • Capacity: 500 GB - 15360 GB
  • Type: SSD
€58.38 €58.38 Amazon Espana Buy
From parametric filter
  • Capacity: 2000 GB - 15360 GB
  • Type: 7200RPM
€66.20 Free two-day shipping with Amazon Prime €66.20 Amazon Espana Buy
Video Card
From parametric filter
  • Chipset: Radeon RX 580
  • Video RAM: 8 GB
  • Length: 223 mm - 403 mm
€195.90 Free two-day shipping with Amazon Prime €195.90 Amazon Espana Buy
Case
Power Supply €104.96 €8.65 €113.61 Coolmod Buy
Base Total: €738.87
Shipping: €17.57
Total: €756.44
* Using your selected merchants and only including nearby in-store pickup prices)
* Some physical dimension restrictions cannot (yet) be automatically checked, such as cpu cooler / RAM clearance with modules using tall heat spreaders.

Comments Sorted by:

jetblackpope 5 points 1 month ago

I am following this build guide (seems like it's going to be awesome btw) but was curious as the parametric filter has combined the B450M PRO4 with the G.Skill Aegis RAM, neither of which are featured on their respective Summit Ridge QVLs.

I have read online about many people managing to get this combination to work despite this, with most managing 2933mhz after enabling the XMP - but I just wanted your opinion on this combination please and thank you manirelli.

protonic129 2 points 1 month ago

https://forums.tomshardware.com/threads/asrock-b450m-pro4-with-g-skill-aegis-3000-mhz-16-gb-2x8-compatibility.3416320/

I found this post online and it just helped me a lot! I bought this combination myself today, so now I'm curious to see how it works out.

jetblackpope 2 points 1 month ago

Well I built my PC with this RAM and Mobo combo literally last night and had it boot to BIOS with no problem. The Mobo has set the RAM speed at 2133 by default but when I turned on XMP briefly it turned it up to 3000 right away. I switched it back off XMP for now and after installing Windows I am going to download and install the recommended 'AMD all in 1 with VGA driver ver:18.10.20_NHDA' from ASRock here: https://www.asrock.com/MB/AMD/B450M%20Pro4/index.asp#Download

After that I'll update the BIOS and try leaving XMP on with the 2933mhz speed as that seems to be what most people have found success with.

Also note I have installed the RAM in slots A2 and B2 as apparently A1 and B1 don't work with XMP or some bs.

protonic129 2 points 1 month ago

Yeah people say that XMP gets the ram to just below 3000mhz. I won't intsall the driver I'll just leave XMP on. It seems to be great value, low price RAM. Only thing is that the sticker is stupid lol

jetblackpope 1 point 1 month ago

Yep, I didn't do the BIOS update or the weird AMD all in one patch but last night I got XMP on and set to 2933 and everything is working fine thus far. Haven't tested any games yet but will let ya know if I have any troubles when I do.

And yes lol, very good value RAM for rated up to 3000mhz. The sticker isn't so bad imo but I can see why lots of people don't like them. Hopefully they don't peel off over time but I bet they will.

jaydeep31 2 points 20 days ago

So, you mentioned that you got all the parts delivered and boot up so are you facing any problems in this setup with this MOBO and RAM??. Just needed the confirmation that it will work without any problems in the future. Sorry but this is my first build and dont want anything to go wrong. Thank you jetblackpope.

jetblackpope 1 point 14 days ago

Heya Jaydeep, yes that is correct! I've got it on my desk running perfectly right now with no issues for probably about a month or so now. Runs BFV, Apex, Battlefront2, Vermintide2 all at 70+ fps with no issues. I cap it at 73fps as I have a 75hz monitor.

As for the RAM/MOBO combo - obviously they are not on each other's QVLs but they are working fine for me. I've got the XMP enabled in the BIOS and the RAM is currently clocked at 2933mhz. Never had any sort of crash with this build yet either.

As for my build, I was using the Canadian version of this site so unless you're also in Canada I can't guarantee that we were looking at similar builds. You can see my build exactly as I have mine built currently here though: https://ca.pcpartpicker.com/user/jetblackpope/saved/XBwRJx

Note the prices I've listed should be appearing in CAD.

Hope this helps!

jaydeep31 2 points 13 days ago

Thank you soo much for your help, and I am also in Canada and I just ordered all the parts abut chose the Sapphire Nitro+ video card and am using the crucial p1 ssd. It's so good to have a confirmation that it doesn't have any problems and all is working thank you again for the help really appreciate it. And just one more thing what monitor are using with this build, i am looking for a 1080p with freesync but a budget one, so if you have any in mind please advise. Thanks again!

jetblackpope 2 points 11 days ago

I got a second hand LG 24MP68VQ-P 24" on Kijiji. It's 75hz & supports freesync via HDMI. Works great for gaming but when doing stuff on the desktop it kind of shows blues/oranges with some weird vertical lines so I can't recommend it because of that. That said I guess if you find one for a decent price I would say what the hell and go for it.

jaydeep31 2 points 11 days ago

Thank you again!.

Phoenix84 1 point 10 days ago

I just finished this exact build today, and I ran into BSOD problems right from the get-go. Turns out I needed to enable XMP on the mobo. Turned that on and boom! Haven't had a BSOD in hours (and I was getting them within minutes of booting up. Sometimes wouldn't even make it to Windows).

jaydeep31 1 point 7 days ago

I also finished this pc today and it works perfectly fine with no errors.

DustinMartin 3 points 1 month ago

Looking to do a $800 build similar to this for my first pc but am almost hesitant to do so with the new AMD Navi coming out this July and and drop in price of Ryzen 7 possible. Would kick myself if I could do a beast sub $1000 build with the newer stuff or just go with a 580 and Ryzen 5 for now.

Spy021 13 points 1 month ago

There's always going to be something newer or better on the horizon. If you let that stop you from pulling the trigger, you'll never jump in and will miss out.

jetblackpope 2 points 1 month ago

The new mid range stuff isn't going to be priced as cheap as the mid range AMD gear available now. If they introduce the 3600 and a mid range Navi at the same price point as what's on this build list they're pretty much making a bunch of unsold stock worthless. Sure, the current mid range stuff may get a little cheaper once the new gear is out, but it'll probably be around the same price you can find them on sale now. I'm going to build this rig and if it has any sign of aging in 2020 I'm going to upgrade with the best AMD CPU & GPU I can afford at that time. That's the beauty of the AM4 socket.

chris4909 1 point 1 month ago

im waiting for the r5 3600 and navi, its only a couple of months

figza 2 points 1 month ago

Thanks for these awesome guides. I'm planning on building this exact build (down to the part). Complete noob question for a first-timer: I noticed the motherboard doesn't have wifi capability. What is the best way to enable wifi for this build and what additional parts would I need? Thanks so much.

Supaplex 1 point 12 days ago

I think a PCI card would be best, but I'm a noob at this aswell. You should google it, there must be a lot of information on it.

cjl12897 2 points 1 month ago

I'm still pretty new to building computers, so go easy on me... I was going to go with the streaming build that was around $1k, but I decided this one fits my budget a little bit better. If I wanted to upgrade to more of a streaming pc in the future, what would I have to do in order for this build to handle that?

DEFOOVY 1 point 19 days ago

i was looking around the same as you but the 'great AMD build' in build guides gives you a pretty good idea, but if you want to save money on that i wouldn't go with the RTX 2060 and just go with the 1660 ti instead. But I'm having a dilemma in choosing between this one and the other too...

OwenTheGorge 2 points 29 days ago

For the Internal Hard Drive, it has decent reviews on this website, yet when I follow the amazon link, it has a rating of 2.7, and many of the reviews seem to receive damaged drives or they fail after 6 months. Has anyone had any problems with this drive yet?

NervousScarab94 1 point 23 days ago

Well, I'm assuming that's because the people are buying the device from Amazon, not the actual developer's website or similar, such as Newegg. I have bought products from Amazon that have terrible reviews on Amazon, but stellar reviews elsewhere.

jaydeep31 2 points 28 days ago

Are the shopping websites displayed here legit??. Sorry but i am new in this. Thanks

TheGameKing247 1 point 26 days ago

yeah

Qazzic 2 points 25 days ago

Can anyone recommend to me a wifi card for this build, please? Or should I strictly use an Ethernet cable?

Ryan_pcnoob 1 point 17 hours ago

Ethernet would be much faster, and if you cant get an ethernet to reach your pc look into powerline adapter. They basically send everything through the wiring of your house and then it plugs into any outlet that you can then put an ethernet through to your pc. If I didnt explain very well just look it up there will be much better explanations. If you really want fast connections do not go with Wi-Fi.

jaydeep31 2 points 21 days ago

I am building this pc and was wondering what would be the best budget 1080p monitor to run with this system?.

kw1452 2 points 17 days ago

I've had my eye on this build for awhile. I am very new to pc gaming, and I know very little about how to build one, so forgive me for my ignorance. I wanted to know if most youtube tutorials on building gaming pcs would prove useful in assembling this particular build. Thank you.

Smelt45 1 point 11 days ago

Yes, YouTube tutorials are very, very useful for PC building. Here is a very useful one: https://www.youtube.com/watch?v=OZaFqY8UF6I

jaydeep31 1 point 7 days ago

See bitwits, linus tech tips, austin evans videos on youtube for pc building and always consult the manuals while building. It is mostly the same process as shown in the videos with just a little pin placement difference.

yawumpus 2 points 7 days ago

I'd recommend moving the HDD filter up to 3TB: I'm seeing a 2TB Hitachi 2K2000 HDD for $46.89 while a 3TB Hitachi 2K3000 HDD is $48.49 (shipping is also $2.50 more for a total of ~10% more for 50% more space). Cost per TB tends to level off after 3TB, making anything more a judgement call beyond the scope of a parametric filter.

The case is out of stock, thus showing an artificially low (beyond the traditional lack of an OS) price.

And as always, check for similar parts to each item: about a month after this was posted, Microcenter slashed the price on first gen Ryzens. I'm sure there are great places to put the savings from an ~$80 6 core Ryzen...

TheForgottenBox 1 point 1 month ago

Quick question, what are the limits of what this build can run and what are possible aesthetic changes to the build, such as led fans or memory sticks.

ImApparentlyHuman 2 points 1 month ago

Well aesthetics are up to the builder, and you can probably look at what a build like this could run on youtube, look up something along the lines of r5 2600 + rx580 test

h0pT0_Gaming 1 point 1 month ago

Is there anything I could do to lower the price yet not decrease gaming performance too much, maybe decrease the price to somewhere around £500 ($650).

SirNelson11 3 points 1 month ago

you could find a cheaper Power supply, and maybe slightly cheaper ram and maybe a cheaper mother board. Though I wouldn’t recommend even looking if anything it wont be that much cheaper total, unless something is on sale somewhere, and you'd get lower quality parts that could fail making you spend even more... after mail in rebates they are decent prices anyway.

If your looking to cut costs consider getting a 1TB HDD and a 250 GB SSD instead of a 2TB and a 500GB. Yes less space but it wont affect performance and with a 250GB SSD you can still can put one or 2 of your favorite games on it. Then when you have more money to spend you can upgrade it. You can also even go lower and get a 1TB HDD and a 120GB SSD. the SSD would only be for the OS and you core programs though there wont be room for games

Also try looking at slickdeals.com people post sales there all the time. may be able to find some stuff here or an equivalent for cheaper.

h0pT0_Gaming 1 point 1 month ago

Thank you! That really helped. :)

FancySnancy 1 point 1 month ago

if you really need to save money you can get just one stick of 8 GB ram but that's only if it's an absolute must

SirNelson11 1 point 1 month ago

You could also scrap the HDD altogether... and just make do with 500GB SSD, then add one when you have more money. granted you'll prob only be able to put like 4 or 5 modern games but still, performance will be constant.

Fynna 1 point 1 month ago

Less ram, different processor, but if you decrease the price you will always loose performance

jsanderson59 0 points 1 month ago

8gb instead of 16gb ram

BigChunky 1 point 1 month ago

what monitor would you pair with this build?

SirNelson11 1 point 1 month ago

I'd say 1080 @ 144hz or you could go 1440 @ 144hz, with a fast response time. but I'd avoid 4k monitors right now. Since this build wont game in 4k to well and they will be super expensive if you go for a 4k @ 144hz monitor. and one with AMD freesync. you honestly could do fine with a 1080 @ 60hz too if you don't want to play anything over 60 FPS (even older games) though not sure if 60hz monitors have freesync

I went with this one and works well for me. (24" 1080 @ 144hz and Curved) i had to change some of the color settings i didnt like the presets. You can find others on sale for cheaper it just may not be curved.

https://www.amazon.com/Sceptre-C248B-144R-24-Inch-FreeSyncTM-DisplayPort/dp/B07GG8RVXP/ref=sr_1_4?crid=2KYOOH594OH6W&keywords=sceptre+monitor&qid=1551293594&s=gateway&sprefix=Sceptre+%2Caps%2C141&sr=8-4

lvor7088 1 point 1 month ago

What kind of frames can this achieve? And how easily upgradeable is it?

jetblackpope 2 points 1 month ago

Google 2600 + 580 testing videos and you will see that it is going to get 60+ FPS at 1080 on all AAA games out currently including BFV which is the most intensive game going around these days as far as I am aware.

I believe it will be easy to upgrade as all new AMD CPUs are going to use the AM4 socket til 2020 and the only thing stopping you in that department and otherwise is power or size limitations that can always be upgraded to allow upgrades in the other areas.

lvor7088 1 point 1 month ago

Alright, thanks. I'm currently trying to decide between these two PCs, and I don't know which one is the better option. Could someone tell me? https://www.wepc.com/builds/best-gaming-pc-under-700/

jetblackpope 2 points 1 month ago

According to Userbenchmark.com, the i5 in the build you've linked from wepc.com very slightly outclasses the Ryzen 2600. However, I am unsure if Intel provides the same pathway for upgrading if you go down their CPU/mobo route. The difference is probably unnoticeable.

Otherwise the build is pretty much identical except the one here on Partpicker has a better power supply as it rated for 'Gold' efficiency, which means it wastes less power and will therefore produce less heat vs the 'Bronze' rated PSU on wepc.com

Also to note is that the RAM on Partpicker is rated at 3000mhz vs 2400mhz on wepc.com, but that is irrelevant pretty much unless you're planning on enabling the XMP on the motherboard to overclock the ram.

jetblackpope 2 points 1 month ago

tldr I'd personally go with the build on PC part picker, generally higher quality or newer components than the wepc.com one you've linked.

lvor7088 2 points 1 month ago

Alright, thanks guys. I think I'll go with the one right here. One last question though. Does this motherboard support overclocks? I know the CPU does, but i don't know about the motherboard.

lvor7088 1 point 1 month ago

What is XMP?

jetblackpope 1 point 1 month ago

XMP is the settings on the BIOS that allow you to easily overclock the RAM. So the RAM may be advertised as 3000mhz speed RAM, but when you plug it in it may only run at a lower speed initially until you go into the BIOS and change the XMP setting.

ffzz97 1 point 1 month ago

i am new to pc building do you recommend these one for me , and what are the main things the you must keep in eye on when building is at RAMs CPU GPU , and any Suggestions on the CPU cooler ?

koiister 1 point 1 month ago

Unless your over locking you won't need an additional CPU cooler. The stock ryzen coolers are quite good at stock speeds. If your gaming gpu will usually be what your most worried about (the Rx 580 is a great deal right now). As far as ram the standard for game right now is 8gb so getting 16gb is going to be your best bet to be future proof and have some multitasking ability.

trevorbruce 1 point 1 month ago

how many fan headers are on the mother board and was there any updates for the motherboard to accept the ryzen cpu?

jetblackpope 1 point 1 month ago

It has 5 fan headers (including the CPU fan header I think): http://pctechreviews.com.au/wp-content/gallery/motherboards_asrock_b450m_pro4/asrock-B450M-pro4016-fans.jpg

It accepts the 2600 perfectly, according to the Asrock B450M Pro4 QVL: https://www.asrock.com/MB/AMD/B450M%20Pro4/index.asp#CPU

Jacob.James 1 point 1 month ago

Looking at this build but I’m very hesitant because I’m extremely new to the pc world and don’t know what to expect. Also, I obviously don’t want to spend too much and this is getting up there in price for me. I just want to be able to play rainbow six siege at around 100 FPS or so.

jetblackpope 1 point 1 month ago

Here is a video of a guy getting 100+ FPS (seems to be around 150 most of the time) in Siege with the RX 580 + Ryzen 5 2600: https://www.youtube.com/watch?v=yvrI2Lev6AA

This build may be 'modest' in parts and price range but really it is a beast when it comes to tackling today's AAA, so it dominates Siege which is now over 3 years old.

pauloverdi 1 point 1 month ago

Hello I'm almost done building this unit (first build ever), my concern is the ventilation, is the one case fan enough for cooling? should I get more fans for the front/top of the unit?

jetblackpope 2 points 1 month ago

In my experience, if you're not overclocking, the one fan at the back will probably be fine. However, if you've bought the Thermaltake Tempered Glass case I'd consider at least one fan at the front to pull in some air as this case doesn't have the side CPU fan tunnel which I am more accustomed to seeing.

I have been building this rig following the parts on the .ca version of this website and I have bought 3 extra case fans just because it should ensure a longer life for the parts inside my desktop. I will be using a 14mm fan on the top slot to exhaust hot air while putting the other two 14mm fans I bought to draw in cool air from down low at the front of the case.

pauloverdi 2 points 1 month ago

thanks!

hello_world_2019 1 point 1 month ago

It seems like the B450 AORUS motherboard is out of stock at this moment, can I use a GA-AB350M with an AMD B350 chipset instead? https://www.newegg.com/Product/Product.aspx?Item=N82E16813145002&ignorebbr=1

Potatogamer1230 1 point 1 month ago

you can but I would do a b450 for the ryzen raven bridge support and overclocking

Bigeared_basset_hound 1 point 1 month ago

The rx580 is an awesome GPU, I Made this build with the 1660ti, and it’s so much more expensive for about 20FPS at the most difference.

S4E 1 point 1 month ago

Could Ark Survival Evolved be on full graphics with this setup?

Potatogamer1230 0 points 1 month ago

not on full. you might be able to play medium-low

Qazzic 1 point 1 month ago

I have a budget slightly higher than this build requires (just under $900), does anyone have suggestions for better parts to include?

eesti 1 point 1 month ago

Throw in a 1660Ti and call it

[comment deleted]
ChrisBeasley 1 point 1 month ago

Hey, I'm not looking to buy a PC really just for gaming. I am a photographer and videographer, and I stream via Twitch on console. Would this sort of build be good enough to run hefty programs like Lightroom and Photoshop together? Aswell as stream via capture card? Thank you.

eesti 1 point 1 month ago

Yes, but you might want a capture card

khjhch 1 point 1 month ago

I have a quick question, would the PRIME B450M-A/CSM motherboard (shown in the parametric filter) support the Ripjaws V F4-3000C16D-16GVRB ddr4 memory (also shown in the parametric filter) at its advertised 3000 MHz clock speed? If not could I overclock the ram to 3000 MHz?

eesti 2 points 1 month ago

Yes

khjhch 1 point 1 month ago

Alright, thank you for the help.

Fullmetal_Jack 1 point 1 month ago

im planning on doing an amd build like this for my first pc. I am looking at the msi rx 580 though, it has better reviews and runs cooler than the xfx. although i see that the xfx has better performance and is cheaper. the msi one is about 30 dollars more. i havent had any luck finding ram as cheap as you. 100$ for corsair 3,000mhz 16gb is the best ive found that still seems to be quality ram. mine totals out at $770 without the terabyte hard drive. I still need an operating system. whats the cheapest way to get windows ten? i already have a laptop with windows 10 installed.

[comment deleted]
Yung_Kleenex 1 point 1 month ago

First PC, friend recommended this site to me, and I was curious as to what this PC is capable of. I am mostly buying the PC to play Rainbow Six Siege and would like to play with an FPS of 100-120+. I have a very basic understanding of specs, and was just wondering if this PC is able to pull that off.

eesti 1 point 1 month ago

Yes, at low-medium

DEFOOVY 1 point 1 month ago

Hi, i'm kinda to PC building and i'm just looking for a gaming computer to just play games like rocket league, rainbow 6, csgo etc. Could someone just confirm if this PC can handle it without any issues

eesti 1 point 1 month ago

yes

marshio 1 point 1 month ago

How would this handle streaming fortnite/league of legends/apex on twitch?

[comment deleted]
Skidsbrown 1 point 1 month ago

Newb here. Does this build come with Windows installed? Also is there a video on how to put this specific build together?

eesti 1 point 1 month ago

No, and no, but many PC Build Videos exists for similar builds

Eclaw22 1 point 1 month ago

How would you install windows on this build?

SFisher 1 point 1 month ago

Hello -

Recently put together this build (with exception to the case, SSD and hard drive). Used the three other pieces I had from my Cyberpower pre-built that I had beforehand and loving it!

Had a few questions for those that are more tech savvy than I - - When I game the cpu temps hover around 60-70 degrees and even reaches 75 degrees at times. Is this too hot? I've read that its not, but being new to pc's i wanted to make sure.

Thanks

eesti 1 point 1 month ago

That's normal

masterthodyu 1 Build 1 point 1 month ago

So I did a similar build and was curious, would you be able to get away with using an EVGA 450 80+ power supply since the wattage consumption is around 300?

manirelli staff submitter 8 Builds 1 point 1 month ago

Assuming it has the correct amount of power cables, you could. It will put you closer to the wattage max if you OC/overvolt though.

masterthodyu 1 Build 1 point 1 month ago

Ok I just wanted to make sure I didn't mess up my build: https://pcpartpicker.com/b/KGzYcf

explodinater 1 point 1 month ago

The case in this build has a code/part number that is CA-1J4-00S1WN-01 but the only ones that are available in New Zealand have the code CA-1J4-00S1WN-00. Is there any difference between these 2 models or is it simply a regional thing?

eesti 1 point 1 month ago

the 00 has acrylic instead of tempered glass

Soul007 1 point 1 month ago

Im completly new to the PC world. Would this built be able to Play games like halo , Apex etc at decent Frames? andis this recomendable?

eesti 1 point 1 month ago

yes

EricRandom1023 1 Build 1 point 1 month ago

I'm just curious if there are any recommendations for fan splitters/case fans. I'd like to add a few intake fans and the board only has 1 non CPU fan header. I'm not entirely sure what the fan header's max draw is so I don't really know how many I can add without using a controller or the PSU.

EricRandom1023 1 Build 1 point 1 month ago

Thanks for the suggestion! So from what I gather, this is going to allow the motherboard to control all fans connected to it at once, just at a single speed?

I'd really like to max the fan capacity of the case. I actually went with the RTX 2060 so I expect a bit more heat production. Three 120s at the front, one 140mm at the top and I'm fine with using the stock fan at the back. Is that single fan header going to be able to support the power draw from 5 fans?

Edit: Just saw that it has a sata connection. I'm assuming this helps with power needs.

And lastly, just out of curiosity, is there something similar to this for possibly going with RGB on the fans?

Viargentum 1 point 1 month ago

Anyone have an estimation on how well this could run Destiny 2 and CS:GO? Obviously it's gonna dominate CS, more curious about Destiny.

DEFOOVY 1 point 1 month ago

This PC wont be going out of date or become "too old" in the near future right?, as these components have been out for a while. I'm currently saving up money from my part time job and i have calculated it will take roughly four- five months to get the funds needed. Is it worth buying newer more "up to date" PC or is this one still pretty current for today's games?

StreamerSalad 1 point 28 days ago

It may be a silly question, but why do these builds not include OS?

JoeyDaBear 2 points 28 days ago

You can usually get the OS cheaper somewhere else and maybe you don't want that type of OS

JoeyDaBear 1 point 28 days ago

On a scale of 1/10, how good is this for gaming?

Marke270 2 points 24 days ago

Price to performance 10/10 now. For me 1080p everything smooth.

JoeyDaBear 1 point 28 days ago

Wait, where's the cooler? I don't see a CPU cooler with it. What are you using as a cooler?

GeoPunx 2 points 26 days ago

If I'm not mistaken, this CPU comes with a stock cooler you can use if you're not trying to do any overclocking. Someone chime in if this is wrong.

JoeyDaBear 2 points 25 days ago

That's right. I just noticed, thanks. I wouldn't be overclocking anyways.

DEFOOVY 1 point 25 days ago

can anyone help me with the system cooling setup, im a little lost...

CameronMcintosh 1 point 24 days ago

I'm new to building PCs so I was wondering if you need thermal paste for this build?

Marke270 1 point 24 days ago

No. This cpu comes with everything you need.

jaydeep31 1 point 7 days ago

No the thermal paste is already applied to the stock CPU cooler.

Captain_Tomato 1 point 22 days ago

I am looking to do a similar build to the one described (~800$). I have always wandered the way MoBo are defined in these build guides. Even for the most expensive build (~2000$) pc part picker sets a parametric filter dependant on price. I understand that in case of having extra money it is usually better to invest it in other components (such as GPU or CPU) but doesn’t the MoBo deserve some extra thought? Thank you for your comments!

greysquirrel 1 point 21 days ago

I built my first pc with this part list. Thanks for putting it together! I am new to the world assembling your own computer, if I can do it anyway can.

Jdub2023 1 point 16 days ago

Does anyone know how high of fps this build would get me on Rainbow Six Siege and CS:GO using the best settings possible? Or can anyone recommend me a pc build that would be really good for those games? This would be my first pc and I just wanna make sure im getting the best for my budget.

jaydeep31 1 point 14 hours ago

I am playing wildlands, DMC 5, division 2 on 1080p ultra and it easily hits 60 fps. So yeah it is one of the best builds if you are looking for high frames in 1080p.

MushroomStu 1 point 14 days ago

This could run a VR headset, right?

jaydeep31 1 point 7 days ago

Yes

MushroomStu 1 point 14 days ago

I want a different case but how much will it matter if I change it?

jaydeep31 1 point 7 days ago

It wont matter but just make sure that the case supports the mobo config i.e microATX.

ltkbaum 1 point 12 days ago

Hi I had a question about this build. I am a beginner but have been doing my research.. I was curious if switching the mobo to a MSI-B450m Gaming Plus Micro ATX is OK. I won't run into any issues? Also I switched me case to a NZXT-H500 ATX mid tower. Let me know your thoughts on these changes please. Also one more question, is it necessary to add an internal hard drive as well as an SSD, or can I get away with just an SSD?

jaydeep31 1 point 14 hours ago

My advice would be to research about your MOBO choice because i have read some bad things about it. And also it is much better to have a ssd even if its 128GB in 2019 so you can have all your main games/ softwares in the ssd and won't have to worry about performance. I have the same build and i opted for a 500GB crucial ssd and a 1TB HDD. I mostly plat wildlands, division 2 and the loading times are in seconds literally 1-5 seconds for a game which is 50+ GB size. It wont hurt to get and ssd instead of just and HDD.

Smelt45 1 point 11 days ago

I am new to PC building and I am wondering if it would be possible to swap out the Radeon RX 580 for a GeForce GTX 970. Also, I am also wondering if it would be possible to run an HTC Vive after swapping the GPU.

gabemikemeans 1 point 11 days ago

I'm looking to build this with at least a GeForce 1080 for a video card. Would a build like this be suitable for VR?

jaydeep31 1 point 7 days ago

Yes

newuser50 1 point 8 days ago

Hi there, I am extremely new to building a PC so I would really appreciate the help from this community. I will be purchasing only the items mentioned on the list. So my question is; are there any other obvious components I would need to purchase that is not mentioned on the list? (sound card, NIC card etc). .

Sorry again, I'm really really new to this and I'm hoping to learn from you guys!

Edit: I think a sound card is integrated into the motherboard

jaydeep31 1 point 7 days ago

A pcie wifi/bluetooth card wont hurt if you dont want to connect through ethernet cable. And also in future also see if you can but some cooler fans for the case.

Monolithica 1 point 6 days ago

Hi, can anybody tell me how well this setup will run Fortnite/ Apex Legends? Thanks in advance.

jaydeep31 1 point 14 hours ago

I have the exact same build and i play Apex at 1080p max settings and hitting around 60 fps easily.

will_handley1 1 point 5 days ago

Hi would this pc build manage over 144 fps on fortnite? I'm looking to move from ps4 to pc fortnite, won't be streaming. Thanks.

jaydeep31 1 point 14 hours ago

It can but have to tweak the settings a little.

bepsfeps 1 point 4 days ago

The case is not in stock anywhere. Do you guys know any other cases that could work with this build

TruBlaze 1 point 2 days ago

Most cases its size or larger should work just fine

jaydeep31 1 point 14 hours ago

Try any case that has support for microATX and also see the dimensions for a video card mentioned inside the case details.

rustymuffin 1 point 1 day ago

I am having trouble finding the power supply listed in this build from my location. Does anyone have a suggestion of a different power supply of similar quality that could instead be used...? Thanks in advance.

[comment deleted]
manirelli staff submitter 8 Builds 1 point 1 month ago

There are zero removed comments at this time. New iterations archive the old comments to the previous revisions which you can find on the left.

eesti 1 point 7 days ago

This aged poorly

[comment deleted]
jetblackpope 1 point 1 month ago

If you're looking at the Ryzen 5 2600, yes the thermal paste comes pre-applied to the the Heatsink (cooler thingy).

Source: I just bought one last Friday.

carrjack76 -2 points 1 month ago

To my knownlaoge, no. I recommend getting thermal paste on Amazon because it's better quality.

[comment deleted]
[comment deleted]
eesti 1 point 1 month ago

Get a GTX 1660ti or even an RTX 2060

[comment deleted]
[comment deleted]
[comment deleted by staff]
manirelli staff submitter 8 Builds 1 point 1 month ago

Please make your own post on the part list opinions wanted forum.

Reason:
Note: Wattages are estimates only. Actual power draw may differ from listed values.
Component Estimated Wattage
AMD - Ryzen 5 2600 3.4 GHz 6-Core Processor 8W - 65W
Crucial - Ballistix Sport LT 16 GB (2 x 8 GB) DDR4-3000 Memory 14W
Silicon Power - A55 512 GB 2.5" Solid State Drive 2W - 10W
Toshiba - 2 TB 3.5" 7200RPM Internal Hard Drive 4W - 20W
Gigabyte - Radeon RX 580 8 GB Gaming 8G Video Card 46W - 185W
Total: 294W