• Log In
  • Register


Gigabyte GA-B250M-DS3H Micro ATX LGA1151 Motherboard

( 4.0 Average / 5 Ratings )




Part #


Form Factor

Micro ATX

CPU Socket



Intel B250

Memory Slots

4 x 288-pin DIMM

Memory Type

DDR4-2133 / 2400

Maximum Supported Memory


RAID Support


Onboard Video

Depends on CPU

CrossFire Support


SLI Support


SATA 6 Gb/s


Onboard Ethernet

1 x 10/100/1000 Mbps

Onboard USB 3.0 Header(s)


Completed Builds Using This Part

See All Completed Builds


Merchant Base Promo Shipping Tax Availability Total
Amazon Espana €81.99 In stock €81.99+
( 33 new from €77.75. Last updated 32 minutes ago. )
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.es at the time of purchase will apply to the purchase of this product.


Styrant 8 points 2 months ago
from completed build J's 1080p Build

Does everything you need a motherboard to do, however I would've preferred two system fan headers. I used a splitter, but I can see how someone might run into a bit of a hassle without any splitters or adapters to connect a second fan.

kevg38 5 points 1 month ago
from completed build First Build - Blue Themed DIYPC

Definitely a good motherboard. I think the Bios interface could be a bit more straight forward yet again it does have an "easy mode". Overall its good product

80-wattHamster 3 points 1 month ago
from completed build Berg Box

It's not my favorite board ever. Placement of the SYS fan header is way off in the corner by the I/O shield, and there's only one of them. The x16 slot is in the top position, placing backplate-equipped GPUs extremely close to the DIMM latches, enough so that they won't fully disengage in such a situation. The release latch is also nearly impossible to access when shroud-equipped graphics is installed. Gigabyte's fan-control scheme is still rather "meh" IMO. It's one PCIe slot short of being properly mATX-sized. Audio circuitry doesn't look to be isolated, though the unnecessary, but defeatable, amber LED highlights suggest that it should be so. The silk-screened PCB lettering is dark gray and tiny, making it nearly impossible to read without really good light. But it booted first time with no hiccups, and has given me no operational or driver trouble. There are better options out there, but I wouldn't recommend against it.

CRYPT3K 11 points 21 days ago
from completed build Cooler Master N200 Office Build

Only complaint is that the MB only has 2 total fan headers (1 for CPU and 1 for case). if you buy this motherboard, you will need a fan splitter. also the manual that comes with it is horrible, tells you nothing. You will need to go online and read that one.

Grog_Berasnev 3 points 18 hours ago
from completed build Theodore the Thinking Machine

Does it's job, but the bright orange LED lights kind of clash with the otherwise black and white colour scheme I had.